Dcc Concepts Items



30 Results Found





Manufacturers
Categories
Scales
COBALT OMEGA CLASSIC SINGLE
Image displayed may not be
representative of actual product.


COBALT OMEGA CLASSIC SINGLE

Part #: DCPCB1A

DCC Concepts 


Cobalt Classic OMEGA Turnout Motor One Cobalt Classic OMEGA Turnout Motor with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools!

A Scale   |   Track & Accessories

$22.95


COBALT OMEGA CLASSIC 12/Pack
Image displayed may not be
representative of actual product.


COBALT OMEGA CLASSIC 12/Pack

Part #: DCPCB12A

DCC Concepts 


Twelve Cobalt Classic Ω Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools!

A Scale   |   Track & Accessories

$260.00


ALPHA BOX
Image displayed may not be
representative of actual product.


ALPHA BOX

Part #: DCPDCDAUX

DCC Concepts 


ALPHA BOX Cobalt Alpha Box α Alpha-Box is a five-amp semi-intelligent DCC~Digital control booster interface that will allow DC or AC based layouts to take advantage of digital control with no need to convert all other operations to DCC. α-Box is also the perfect way for those with basic DCC systems to add to their accessory control ability without changing their DCC system. Designed to work perfectly with Cobalt α Alpha, the α-Box can also be used as a 5 amp booster for NCE Power Cab and other DCC systems. Presented in a sophisticated aluminium case, the α-Box is a high quality addition to your DCC system. A 5 amp 12~18v regulated DC power supply is needed.

A Scale   |   Track & Accessories

$139.95


CONTROLLER CADDY 10/PK
Image displayed may not be
representative of actual product.


CONTROLLER CADDY 10/PK

Part #: DCPDCCCC1

DCC Concepts 


CONTROLLER CADDY 10/PK

n/a   |   n/a

$119.50


COBALT S LEVER - 6 PACK
Image displayed may not be
representative of actual product.


COBALT S LEVER - 6 PACK

Part #: DCPCBS6

DCC Concepts 


A six pack of Cobalt-S Signal Box Lever including all installation accessories. Cobalt-S Levers bring a sense of reality to the control of model railways. They are a substantial high quality product that is 140mm (5-1/2”) high, with a feel that has never been achieved before without long hours of skilled work on the modellers workbench.

A Scale   |   Track & Accessories

$167.70


COBALT IP DIGITAL SINGLE
Image displayed may not be
representative of actual product.


COBALT IP DIGITAL SINGLE

Part #: DCPCB1DIP

DCC Concepts 


One Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools!

A Scale   |   Track & Accessories

$29.95


ALPHA ADAPTER LEADS GMX
Image displayed may not be
representative of actual product.


ALPHA ADAPTER LEADS GMX

Part #: DCPDCDGMX

DCC Concepts 


Cobalt Alpha Adapter for Gaugemaster Prodigy. The DCD-GMX is an adapter that translates the communication language of Cobalt Alpha to allow you to interface it directly with a Gaugemaster or MRC DCC System. It is very simple to install -simply connect it to Cobalt Alpha, and then plug the other end into your Gaugemaster or MRC DCC system command bus.

A Scale   |   Track & Accessories

$14.95


8 OUTPUT DCC SOLENOID DEC
Image displayed may not be
representative of actual product.


8 OUTPUT DCC SOLENOID DEC

Part #: DCPADS8FX

DCC Concepts 


Universal DCC Decoder CDU Solenoid Drive (8-way, Added Features) ADS-8fx is a high performance high feature level 8-output DCC accessory decoder with built-in CDU on every output designed to power Seep, Hornby, Peco and similar high current point motors properly and make sure they change every single time! ADS-8fx can be powered with either DC (for DC only layouts) or with DCC to give all the advantages of digital or computer control. ADS-8fx will tolerate a very wide DC input voltage or a wide track bus voltage range and guarantees to give superb results every time. Our specially designed approach to charging control means that power supply loading is very low on both DC or DCC layouts, and because it stores all the energy it needs on-board, when it changes your solenoids it will NOT drain important train-running power from your system.

A Scale   |   Track & Accessories

$99.95


COBALT IP 8-WAY DECODER
Image displayed may not be
representative of actual product.


COBALT IP 8-WAY DECODER

Part #: DCPAD8FX

DCC Concepts 


COBALT IP 8-WAY DECODER

n/a   |   n/a

$69.95


WHITE LOCO LAMPS 6PK
Image displayed may not be
representative of actual product.


WHITE LOCO LAMPS 6PK

Part #: DCPDMLLLBWH

DCC Concepts 


WHITE LOCO LAMPS 6PK

n/a   |   n/a

$54.95


COBALT IP ANALOG SINGLE
Image displayed may not be
representative of actual product.


COBALT IP ANALOG SINGLE

Part #: DCPCB1IP

DCC Concepts 


One Cobalt iP Analog “Intelligent Power” Turnout Motor with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools!

A Scale   |   Track & Accessories

$24.95


COBALT IP ANALOG 6/Pack
Image displayed may not be
representative of actual product.


COBALT IP ANALOG 6/Pack

Part #: DCPCB6IP

DCC Concepts 


COBALT IP ANALOG 6/PK Six Cobalt iP Analog “Intelligent Power” Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools!

A Scale   |   Track & Accessories

$139.95


ALPHA CENTRAL 12WAY PANEL
Image displayed may not be
representative of actual product.


ALPHA CENTRAL 12WAY PANEL

Part #: DCPDCDAEC

DCC Concepts 


ALPHA CENTRAL 12WAY PANEL Cobalt Alpha Central integrated 12-way digital switch Price: £108.29Tax Free The ultimate in simple-to-install control panels. Have and NCE system? Take it out of the box, plug it into your command bus with the cable supplied and your installation is finished! It is usable with DCC… and even DC modellers can adopt it if they use an accessory circuit for their point motors etc… by connecting to Sniffer or Alpha Box and either Cobalt iP Digital Point Motors or Accessory decoders on turnouts etc.)

A Scale   |   Track & Accessories

$189.95


ADDED VALUE PACK
Image displayed may not be
representative of actual product.


ADDED VALUE PACK

Part #: DCPCMC

DCC Concepts 


ADDED VALUE PACK

n/a   |   n/a

$24.95


ALPHA POWER 5 AMP SUPPLY
Image displayed may not be
representative of actual product.


ALPHA POWER 5 AMP SUPPLY

Part #: DCPDCDPWR

DCC Concepts 


Cobalt Alpha Power 18V, 5 amp DC or DCC power supply supplied with mains lead suitable for your country. Cobalt α Alpha Power – Smooth, well regulated power for perfect performance! It’s not commonly understood, but even the digital systems that show the use of AC power supplies in their manuals actually run on DC internally… and what you may also not know is that while AC power supplies may be lower cost, they also give ZERO protection from inevitable voltage surges and level changes, increasing the possibility of system damage! So – using AC power makes no sense in reality – especially as all involved in digital electronics agree that the quality of power supply you choose will, more than any other factor, dictate the eventual performance of your model railway, because digital electronics in particular require smooth, well filtered DC! Without it, interference added to the digital commands can at best cause problems with communication and may, in the extreme, actually damage your precious decoders and other items. It just makes good sense to use a top quality, properly regulated DC power supply.

A Scale   |   Track & Accessories

$119.95


COLBALT S - DETAILING
Image displayed may not be
representative of actual product.


COLBALT S - DETAILING

Part #: DCPCSD

DCC Concepts 


Cobalt-S Cosmetic Parts (Top Castings x6) (Numbers x12) Spare etched brass numbers and cast metal ribbing for Cobalt-S.

A Scale   |   Track & Accessories

$19.95


ALPHA ADAPTER LEADS DTX
Image displayed may not be
representative of actual product.


ALPHA ADAPTER LEADS DTX

Part #: DCPDCDDTX

DCC Concepts 


Cobalt Alpha Adapter Digitrax The DCD-DTX is an adapter that translates the communication language of Cobalt Alpha to allow you to interface it directly with a Digitrax DCC System. It is very simple to install -simply connect it to Cobalt Alpha, and then plug the other end into your Digitrax DCC system command bus.

A Scale   |   Track & Accessories

$14.95


99 BRASS NUMBERS/CBS LEVR
Image displayed may not be
representative of actual product.


99 BRASS NUMBERS/CBS LEVR

Part #: DCPCS99

DCC Concepts 


Cobalt-S Numbers Etched Brass (Numbers 1~99) Etched brass numbering for up to 99 levers. (Also very useful for platform or control panel numbering).

A Scale   |   Track & Accessories

$19.95


LIGHT CONTROL LED/LAMPS
Image displayed may not be
representative of actual product.


LIGHT CONTROL LED/LAMPS

Part #: DCPDMLLCB

DCC Concepts 


LIGHT CONTROL LED/LAMPS

n/a   |   n/a

$27.95


2 OUTPUT DCC SOLENOID DEC
Image displayed may not be
representative of actual product.


2 OUTPUT DCC SOLENOID DEC

Part #: DCPADS2FX

DCC Concepts 


2 OUTPUT DCC SOLENOID DEC

n/a   |   n/a

$27.95


4WAY ACCESSORY DECODER
Image displayed may not be
representative of actual product.


4WAY ACCESSORY DECODER

Part #: DCPAD4

DCC Concepts 


4WAY ACCESSORY DECODER

n/a   |   n/a

$54.95


Analog Turnout Motor
Image displayed may not be
representative of actual product.


Analog Turnout Motor

Part #: 8258DCPCB1DIP

DCC Concepts 


A Scale   |   Track & Accessories

$25.73

MSRP $29.95


ALPHA MANUAL
Image displayed may not be
representative of actual product.


ALPHA MANUAL

Part #: DCPALPHAMANUAL

DCC Concepts 


ALPHA MANUAL

n/a   |   n/a

$0.00

MSRP $0.00


COBALT SPST SW/LED 6 PK
Image displayed may not be
representative of actual product.


COBALT SPST SW/LED 6 PK

Part #: DCPCMSD

DCC Concepts 


Cobalt SPDT Switches Assorted LEDs (w/Chrome Mountings) Six SPDT (Single Pole Double Throw) switches to be used with the Cobalt PSU-2 power supply to simplify wiring and control of Cobalt Classic, Cobalt Classic Ω and Cobalt iP Analog point motors. The pack also includes a wide assortment of LEDs, including red and green chrome bezel mounted LEDs, to give a very professional look to your control panel. (Usable and highly recommended for all Cobalt Classic, Cobalt Classic Ω or Cobalt iP Analog motors when PSU-2 is also used.) Use these switches as per instructions with Cobalt Classic or Cobalt Classic Ω Omega (analog) motors.

A Scale   |   Track & Accessories

$29.95


COBALT IP 2-WAY DECODER
Image displayed may not be
representative of actual product.


COBALT IP 2-WAY DECODER

Part #: DCPAD2FX

DCC Concepts 


COBALT IP 2-WAY DECODER

n/a   |   n/a

$19.95


COBALT IP ANALOG 12/PK
Image displayed may not be
representative of actual product.


COBALT IP ANALOG 12/PK

Part #: DCPCB12IP

DCC Concepts 


COBALT IP ANALOG 12/Pack Twelve Cobalt iP Analog “Intelligent Power” Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools!

A Scale   |   Track & Accessories

$269.95


COBALT DIGITAL MANUAL
Image displayed may not be
representative of actual product.


COBALT DIGITAL MANUAL

Part #: DCPIPDIGITL

DCC Concepts 


COBALT DIGITAL MANUAL

n/a   |   n/a

$0.00

MSRP $0.00


SNG ACCESSORY DECODER
Image displayed may not be
representative of actual product.


SNG ACCESSORY DECODER

Part #: DCPAD1

DCC Concepts 


SNG ACCESSORY DECODER

n/a   |   n/a

$13.95


SWITCH PK 3PK W/LED ASST
Image displayed may not be
representative of actual product.


SWITCH PK 3PK W/LED ASST

Part #: DCPCMSA

DCC Concepts 


SWITCH PK 3PK W/LED ASST

n/a   |   n/a

$19.95


SWITCH PACK 3PK RED LED
Image displayed may not be
representative of actual product.


SWITCH PACK 3PK RED LED

Part #: DCPCMSR

DCC Concepts 


SWITCH PACK 3PK RED LED

n/a   |   n/a

$19.95