Adhesives/Cleaners/Lubricants Items

1 2 13 14 15 17 19 20 21 22



851 Results Found





Manufacturers
Categories
Scales
XL NLGI Grease 1    1/2oz
Image displayed may not be
representative of actual product.


XL NLGI Grease 1 1/2oz

Part #: 242-1111

Excelle Lubricants 


XL NLGI PTFE Grease 1 -- 1/2oz 14.8mL

A Scale   |   Adhesives/Cleaners/Lubricants

Tix Flux - for soldering     8oz
Image displayed may not be
representative of actual product.


Tix Flux - for soldering 8oz

Part #: 118-5

Allied Manufacturing (TIX) 


Adhesive - Tix Flux -- 8oz 237mL. Works on most metals and alloys and may be used with any soft solder. Water soluble and will wash off after drying. If a possibility of corrosion exists, may be neutralized by a solution of bicarbonate of soda.

A Scale   |   Adhesives/Cleaners/Lubricants

XL Medium Lube
Image displayed may not be
representative of actual product.


XL Medium Lube

Part #: 242-180

Excelle Lubricants 


XL Medium Oil -- 1/2oz 15ml

A Scale   |   Adhesives/Cleaners/Lubricants

Roket Card Glue 50ml
Image displayed may not be
representative of actual product.


Roket Card Glue 50ml

Part #: 806-AD57

Deluxe Materials Ltd. 


Roket Card Glue for Cardstock -- 1.7oz 50ml

A Scale   |   Adhesives/Cleaners/Lubricants

Roket Rapid CA 20g
Image displayed may not be
representative of actual product.


Roket Rapid CA 20g

Part #: 806-AD44

Deluxe Models 


Roket Rapid CA -- Medium Viscosity .7oz 20g

A Scale   |   Adhesives/Cleaners/Lubricants

Plastic Cement 7/8oz 2/
Image displayed may not be
representative of actual product.


Plastic Cement 7/8oz 2/

Part #: 704-3509C

Testors Corp. (Rust-Oleum Corporation)  


Cement for Plastic Models 2-Pack -- 7/8oz 25.9mL Each - Carded

A Scale   |   Adhesives/Cleaners/Lubricants

Poly-Zap Adhesive   1/2oz
Image displayed may not be
representative of actual product.


Poly-Zap Adhesive 1/2oz

Part #: 547-422

Robart Mfg. Inc. 


Poly-Zap Adhesive -- 1/2oz 14.8mL

A Scale   |   Adhesives/Cleaners/Lubricants

Track cleaning pad kit
Image displayed may not be
representative of actual product.


Track cleaning pad kit

Part #: 116-10003

A Line Products 


Track Cleaning Pad Kit -- Fits 40' Box Cars (Car not included)

HO Scale   |   Adhesives/Cleaners/Lubricants

5-Min Z-Poxy Syringe 1oz
Image displayed may not be
representative of actual product.


5-Min Z-Poxy Syringe 1oz

Part #: 547-36

Robart Mfg. Inc. 


Z-POXY Zap 5 Minute Epoxy Quick Shot Syringe -- 1oz 28.4mL

A Scale   |   Adhesives/Cleaners/Lubricants

PL-64 Electro Lube
Image displayed may not be
representative of actual product.


PL-64 Electro Lube

Part #: 552-640

Peco (Pritchard Patent Products) 


Lubricant -- Electro Lube Cleaner & Oil

A Scale   |   Adhesives/Cleaners/Lubricants

Jet Tips Extensions 6/
Image displayed may not be
representative of actual product.


Jet Tips Extensions 6/

Part #: 289-788

CGM Enterprises 


Jet Tips(TM) Extensions pkg(6)

A Scale   |   Adhesives/Cleaners/Lubricants

Clean Disks 220-Grit 20/
Image displayed may not be
representative of actual product.


Clean Disks 220-Grit 20/

Part #: 343-1187

JL Innovative Design 


Abrasive Cleaning Disks pkg(20) -- 220-Grit

HO Scale   |   Adhesives/Cleaners/Lubricants

Aero Tech Mix Nozzles 5/
Image displayed may not be
representative of actual product.


Aero Tech Mix Nozzles 5/

Part #: 806-AC14

Deluxe Materials Ltd. 


Aero Tech Auto Mix Nozzles -- pkg(5)

A Scale   |   Adhesives/Cleaners/Lubricants

Cover Grip 150ml
Image displayed may not be
representative of actual product.


Cover Grip 150ml

Part #: 806-AD22

Deluxe Materials Ltd. 


Cover Grip Heat-Sensitive Adhesive -- 5.1oz 150ml

A Scale   |   Adhesives/Cleaners/Lubricants

Dr. Mike's #2       1/2oz
Image displayed may not be
representative of actual product.


Dr. Mike's #2 1/2oz

Part #: 352-201

Innovative Promotions 


Dr. Mike's Model-n' Crafter's Glue #2 -- 1/2oz 14.8mL

A Scale   |   Adhesives/Cleaners/Lubricants

Colofix-color grn HO/N/Z
Image displayed may not be
representative of actual product.


Colofix-color grn HO/N/Z

Part #: 272-170661

Faller GMbH 


Coloflix Glue -- Green

A Scale   |   Adhesives/Cleaners/Lubricants

Tacky Glue 112g
Image displayed may not be
representative of actual product.


Tacky Glue 112g

Part #: 806-AD27

Deluxe Materials Ltd. 


Tacky Glue -- 4oz 112g

A Scale   |   Adhesives/Cleaners/Lubricants

Head Cleaning Replacement
Image displayed may not be
representative of actual product.


Head Cleaning Replacement

Part #: 738-6413

TomyTec Co Ltd 


Replacement Cleaning Head Set for Wheel Cleaning Track

N Scale   |   Adhesives/Cleaners/Lubricants

Micro Liquidtape 1oz
Image displayed may not be
representative of actual product.


Micro Liquidtape 1oz

Part #: 460-MI10

Microscale Inc. 


Micro Liquitape -- Repositionable Tacky Adhesive - 1oz 29.6mL

A Scale   |   Adhesives/Cleaners/Lubricants

$4.50

MSRP $4.50


Call for Order Information
Right Turn Staircase
Image displayed may not be
representative of actual product.


Right Turn Staircase

Part #: 570-90945

Plastruct Inc. 


Custom Staircase -- 9/64 x 57/64 x 1" Right Turn

O Scale   |   Adhesives/Cleaners/Lubricants

$9.95

MSRP $9.95


Call for Order Information
1/4" 6.4mm Styrene I Beam 5/pk
Image displayed may not be
representative of actual product.


1/4" 6.4mm Styrene I Beam 5/pk

Part #: 570-90516

Plastruct Inc. 


1/4" 6.4mm Styrene I Beam 5/pc

A Scale   |   Adhesives/Cleaners/Lubricants

$9.00

MSRP $9.00


Call for Order Information
Styrene Truss Opn WS2 1/4" 2/pk
Image displayed may not be
representative of actual product.


Styrene Truss Opn WS2 1/4" 2/pk

Part #: 570-90653

Plastruct Inc. 


Styrene - Open Web Trusses - Warren Style 2 pkg(2) -- 1/4 x 6" .6 x 15.2cm

A Scale   |   Adhesives/Cleaners/Lubricants

$6.90

MSRP $6.90


Call for Order Information
Aero-Car Track & Rail Cleaner 8oz
Image displayed may not be
representative of actual product.


Aero-Car Track & Rail Cleaner 8oz

Part #: AER-ACT6006

Aero-Car Hobby Lubricants 


Track Cleaner & Conditioner – 8oz. Cleans your track and lays down a non-slippery conductive film that will improve current flow. Will enhance the operation of DCC and Sound Systems. May be used with most track cleaning cars.

A Scale   |   Adhesives/Cleaners/Lubricants

$7.29

MSRP $7.29


Call for Order Information
Loco/Track Maintnce Kit 3pk
Image displayed may not be
representative of actual product.


Loco/Track Maintnce Kit 3pk

Part #: 150-193

Atlas Model Railroad Co. 


Loco/Track Maintenance Kit -- Gear Lubricant, Heavy Duty Motor Bearing Lubricant, Conducta-Lube Cleaner

A Scale   |   Adhesives/Cleaners/Lubricants

$42.95

MSRP $42.95


Call for Order Information
IC-2000 Rubber-Toughened CA 1 oz.
Image displayed may not be
representative of actual product.


IC-2000 Rubber-Toughened CA 1 oz.

Part #: BOB-118

Bob Smith Industries 


IC-2000 Rubber-Toughened CA 1 oz. IC-2000â„¢ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000â„¢ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SETâ„¢. When cured, IC-2000â„¢ is pliable enough to be carved with a hobby knife. IC-2000â„¢ is the best adhesive for R/C car tires. IC-2000â„¢ has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Call for Order Information
Insta-Cure Super Thin CA 1/2 oz
Image displayed may not be
representative of actual product.


Insta-Cure Super Thin CA 1/2 oz

Part #: BOB-101

Bob Smith Industries 


Insta-Cure Super Thin CA 1/2 oz. Insta-Cureâ„¢ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

A Scale   |   Adhesives/Cleaners/Lubricants

$3.99

MSRP $3.99


Call for Order Information
Insta-Cure+ Gap Filling CA 2 oz.
Image displayed may not be
representative of actual product.


Insta-Cure+ Gap Filling CA 2 oz.

Part #: BOB-108

Bob Smith Industries 


Insta-Cure+ Gap Filling CA 2 oz. Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Call for Order Information
Insta-Cure Super Thin CA 1 oz
Image displayed may not be
representative of actual product.


Insta-Cure Super Thin CA 1 oz

Part #: BOB-102

Bob Smith Industries 


Insta-Cure Super Thin CA 1 oz. Insta-Cureâ„¢ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.99

MSRP $5.99


Call for Order Information
Insta-Cure Super Thin CA 2 oz
Image displayed may not be
representative of actual product.


Insta-Cure Super Thin CA 2 oz

Part #: BOB-103

Bob Smith Industries 


Insta-Cure Super Thin CA 2 oz. Insta-Cureâ„¢ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Call for Order Information
Maxi-Cure Gap Filling CA 1 oz.
Image displayed may not be
representative of actual product.


Maxi-Cure Gap Filling CA 1 oz.

Part #: BOB-112

Bob Smith Industries 


Maxi-Cure Gap Filling CA 1 oz. Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application.

A Scale   |   Adhesives/Cleaners/Lubricants

$5.99

MSRP $5.99


Call for Order Information
Insta-Flex Flexible Thin 1 oz.
Image displayed may not be
representative of actual product.


Insta-Flex Flexible Thin 1 oz.

Part #: BOB-119

Bob Smith Industries 


Insta-Flex Flexible Thin 1 oz. nsta-Flexâ„¢ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEXâ„¢ does not turn brittle and remains clear, even if accelerated with INSTA-SETâ„¢. It has superior shock resistance. Although not as thin in consistency as INSTA-CUREâ„¢, INSTA-FLEXâ„¢ still has good penetrating qualities and its application can be easier to control. For CA hinges, we recommend drilling a 1/16" hole in the center of the hinge slots to insure the complete saturation of the hinge when INSTA-FLEXâ„¢ is applied. INSTA-FLEXâ„¢ has a different, less irritating odor compared to regular CA's, but still can not be used on white foam. INSTA-FLEXâ„¢ has also proven to be superior when bonding anodized aluminum.

A Scale   |   Adhesives/Cleaners/Lubricants

$9.99

MSRP $9.99


Call for Order Information
1/16"/1.5mm Brass Insert Wire 10pk
Image displayed may not be
representative of actual product.


1/16"/1.5mm Brass Insert Wire 10pk

Part #: 570-90122

Plastruct Inc. 


1/16"/1.5mm Brass Insert Wire 10pk

A Scale   |   Adhesives/Cleaners/Lubricants

$8.70

MSRP $8.70


Call for Order Information
Plastruct Plastic Weld - 2oz
Image displayed may not be
representative of actual product.


Plastruct Plastic Weld - 2oz

Part #: 570-2

Plastruct Inc. 


Plastic Weld Plastic Solvent Cement -- 2oz 59.1mL

A Scale   |   Adhesives/Cleaners/Lubricants

$5.69

MSRP $5.69


Call for Order Information
Solder 275 Melt/125Grains 20 pieces
Image displayed may not be
representative of actual product.


Solder 275 Melt/125Grains 20 pieces

Part #: 118-1

Allied Manufacturing (TIX) 


Tix Solder 275-Degree Melt -- 125 Grains, 20 Sticks - Indium-based solder melt at 275° F (150° lower than lead-tin solders, with a much higher wetting ability). Specific gravity is 8.6, while the bonding holding strength is 4,000lbs PSI. Will never tarnish; contains no silver or bismuth and will solder to platinum, golds, silver and numerous alloys. Solid-state components can be soldered without using a heat sink. Repairs to printed circuit boards are simple as the low melting point will not damage the board. use with any Flux, rosin, chloride or acid.

A Scale   |   Adhesives/Cleaners/Lubricants

$12.60

MSRP $12.60


Call for Order Information
Solder 275 Deg Melt/375 Grains 60 sticks
Image displayed may not be
representative of actual product.


Solder 275 Deg Melt/375 Grains 60 sticks

Part #: 118-2

Allied Manufacturing (TIX) 


Tix Solder 275 Degree Melt -- Approximately 375 Grains, 60 Sticks

A Scale   |   Adhesives/Cleaners/Lubricants

$35.90

MSRP $35.90


Call for Order Information
Touch-N-Flow Filler Bottle
Image displayed may not be
representative of actual product.


Touch-N-Flow Filler Bottle

Part #: 232-715

Creations Unlimited 


Touch-N-Flow Filler Bottle

A Scale   |   Adhesives/Cleaners/Lubricants

$6.99

MSRP $6.99


Call for Order Information
Plast-I-Weld Glue 2oz
Image displayed may not be
representative of actual product.


Plast-I-Weld Glue 2oz

Part #: 232-7112

Creations Unlimited 


Plast-I-Weld Glue -- 2oz 59.1ml

A Scale   |   Adhesives/Cleaners/Lubricants

$5.99

MSRP $5.99


Call for Order Information
Pliobond Adhesive 1oz
Image displayed may not be
representative of actual product.


Pliobond Adhesive 1oz

Part #: 256-49102

Micro Engineering 


Pliobond Adhesive - Tube w/Fine Tip -- 1oz 29.6mL

A Scale   |   Adhesives/Cleaners/Lubricants

$6.10

MSRP $6.10


Call for Order Information
Expert Plastic Cement 25g
Image displayed may not be
representative of actual product.


Expert Plastic Cement 25g

Part #: 272-170492

Faller GMbH 


Expert Liquid Cement -- .9oz 25g

A Scale   |   Adhesives/Cleaners/Lubricants

Expert Laser Glue 25g
Image displayed may not be
representative of actual product.


Expert Laser Glue 25g

Part #: 272-170494

Faller GMbH 


Expert Laser Glue -- Multi-Purpose - 7/8oz 25g

A Scale   |   Adhesives/Cleaners/Lubricants

$6.99

MSRP $6.99


Call for Order Information

1 2 13 14 15 17 19 20 21 22